Working Western Commission

Just thought I'd post photos of my latest set! Commission set, 6.28.15








Comments

Post a Comment

Popular posts from this blog

How to Tie a Mecate onto Slobber Straps

Image
I offer these custom slobber straps in my  Etsy Store  and thought I'd make a short tutorial on how to tie them. Start off by tying the RIGHT side slobber strap (with the text horizontal to the ground, the text reading left to right) Start by threading the end of the mecate (23' yacht rope with poppers) from the inside of the strap to the outside. Pull it through enough to leave yourself about six inches of tail. Take the tail up and behind the strap, then come down to form a knot. Now on to the left strap.  This strap gets threaded from inside to outside just like the other, except you're going to slide it down about 12 feet down the rope, give or take depending on how long you'd like your rein loop. Then pinch the strap ends together. Twist a loop, with the tail (lead end with popper) underneath.  Tighten it around the slobber strap. Hoping this guide is helpful! Thank you to all of my customers for their ...
Read more

English Fitted Pad Tutorial

Image
I often get asked if I will have fitted English saddle pads available in my Etsy store, and since I don't make them very often (it's impossible to make them fit everyone's saddle correctly), here is a tutorial on my method.  I've made them several different ways, but I find this to provide the closest contact with the saddle, while still providing the smooth rounded pad edges of fleece that still looks to scale. First, make a pattern on light card stock.  Cut it out making sure it's symmetrical.   Trace it onto the back of a piece of white fleece.  Then, trace the line with a small amount of Tacky Glue. Lay  a piece of flexible cording (I have used a yarn cording) onto the glue:  After it's dried, cut out the pad, leaving 1/4" of fabric on the outside of the cord. Then clip half way to the cord, every 1/4".  Sew each "tab" down to the underside of the pad, grabbing a small amount of the fabric on the pad underside.  You can ...
Read more

Australian Light Horse Set - Part 1

Image
I could write a long post about 2016, and reflect, but instead I'm going to get straight to tack, because I'm so excited to share more about this recent project. I love a new challenge, and I decided to take some photos along the way while making this Australian Light Horse  tack set.  I have a few notes for the next time, but I'm very pleased with how this came out for being a first attempt. This set produced a lot of first for me, one of which being a partially exposed tree that had to be real wood and metal. The second was an Australian style saddle, which I have managed to never make in my 8 years of serious tack making. After making a pattern I was happy with, I started making my tree with two carved down pieces of Balsa wood.  It's a lightweight and flexible craft wood, but next time I'll be using a harder wood and carving more shape into it I think.  Using some brass craft metal (K&S Engineering found at Hobby Lobby), I made some nicks in wh...
Read more